Buy Low Price From Here Now
BULB ONLY, DOES NOT INCLUDE HOUSING. NEEDS TO BE INSTALLED INTO AN EXISTING OEM HOUSING.
Readmore
Technical Details
- 100% COMPATIBLE OEM BULB- FITS INTO ORIGINAL MITSUBISHI DLP TV LAMP HOUSING
- BULB ONLY, NO HOUSING.
- EASY TO INSTALL
See more technical details
By Wood Wizard (Colorado, USA)
The picture in my TV looks muck better/brighter with this new bulb. You need to feel comfortable around electronics to install this. BE VERY CAREFUL NOT TO TOUCH THE LENS WITH YOUR BARE HANDS! If either of these things is a problem for you, have a professional install it for you.
Last note: the front of the bulb is slightly thicker than the original. You will need to put in all the mounting screws loosely in the mounting, then tighten them in caddy-corner-pairs. Don't worry, it will fit.
By David R. Mcclane
After much searching and grief from my warranty company, I was able to locate this replacement lamp. Pulled the old unit out (very easy) and removed the old lamp from the housing. Be sure to clean the housing before replacing the lamp. Wear vinyl gloves so as not to touch the bulb directly with your fingers. The oil from your fingers could shorten the life of the bulb. Make sure the housing is dry before inserting the new lamp. I used a hair dryer to ensure 0 moisture was present. The lamp fired right up and has worked very well since it was installed.
Images Product
Buy 915P049010 Now
0 comments:
Post a Comment